Product Lines > IPPC/PPC/HMIs > PPC-60
PPC-60 Mini Panel PC with 6.0" QVGA STN / Mono LCD Display        Larger image (24 Kb) Introduction Specifications Ordering Information Datasheet Download (pdf 203Kb)
INTRODUCTION
The PPC-57 and PPC-60 mini panel PCs fulfil all the requirements necessary to serve as industrial class operator interfaces. This series of panel PCs, when combined with optional touchscreens, become highly user-friendly HMIs for system integrators and end-users. Both the PP-57 and PPC-60 feature an all-in-one 386 PC board, on-board VGA, two COM ports, 10Base-T Ethernet, CompactFlash module, and an external expansion slot for a 16-bit PC/104. The PPC-57 comes with two LCD options, a 5.7" color STN or Mono LCD display. The PPC-60 is equipped with a 6.0" STN LCD. Built to industrial standards, these mini panel PCs are well-suited for an endless variety of industrial and transportation applications. 16-bit PC/104 feature A new riser card with 16-bit ISA signals has been pre-installed as A default, because the 100-pin connector is bigger than the opening on the back cover. It is possible to dock two PC/104 cards at the same time. Serial port COM2 configurations A right angle DIP switch is accessible through a small opening on the upper side of the back cover to allow configuration of COM2 for RS-232, RS-422 or RS-485 operation. CPU board/major components A new 100-pin PC/104 riser connector has been added to replace the 60-pin connector The jumpers used to configure COM2 have been removed (a DIP switch has been added to the I/O connector instead) Another built-in flat panel display connector contains enough signals to support a full VGA flat panel display Supports either Fast Page Mode or EDO memory Because a new version of the 6117C chipset is used and a PS/2 mouse is implemented on the 6-pin keyboard connector, a standard Advantech "Y" cable can be used to connect to the keyboard and mouse CompactFlash adapter module The original SSD slot on the PPC-55 has not been changed. A CompactFlash module has been designed to plug into the existing SSD slot for replacement of the SSD memory module A CompactFlash memory card can be easily inserted or removed from the adapter module The benefit of this change is that the user can upgrade the memory based on what is currently available in the market CompactFlash memory is easy to get and also fits all digital cameras Cover for PC/104 adapter cards (optional) A new metal cover can be attached to the existing back cover mounting holes, to support up to two PC/104 adapter cards.
SPECIFICATIONS
General Specifications Construction: Plastic molding; optional metal PC/104 extension cover CPU: ALi M6117C, which is equivalent to a 80386SX CPU BIOS: AMI 128 KB Flash memory RAM: One 72-pin SIMM socket, accepts 1, 4, 16 MB FPM or EDO DRAM (single side) Disk drive housing: Supports one CompactFlash adapter VGA: C&T 65545 chipset on board with 512 KB DRAM, supports Panel resolutions up to 640 x 480 @ 256 colors Ethernet (LAN): Realtek RTL8019AS chipset on board, Novell NE-2000 compatible, 10Base-T interface Multi-mode parallel port: Configured to LPT1, LPT2, LPT3 or disabled. Supports SPP/EPP/ECP. D-SUB 25-pin connector Serial ports: One serial RS-232 port, one serial RS-232/422/485 port (DIP switch settings) IDE hard disk drive interface: Supports up to two Enhanced IDE devices, auto-detect BIOS Expansion slot: Supports up to two cascaded 16-bit PC/104 cards with +5 V and +12 V only Watchdog timer: Adjustable period up to 62 seconds Supports multiple power saving modes: Panel mounting mechanism: Dimensions: 197.5 x 142.8 x 63.4 mm (7.76" x 5.61" x 2.49") Weight: 1.5 kg (3.3 lbs) PS/2 keyboard/mouse connector: Mini-DIN keyboard connector Environmental Operating temperature: 0 ~ 45?C (32 ~ 113 ?F) Relative humidity: 0 ~ 95% RH (non-condensing) Safety: Meets UL/CSA FCC Class A, CE approved: Vibration: 10 ~ 18 Hz, 1.5 mm peak-to-peak displacement; 18 ~ 500 Hz, 1 G acceleration Water resistance: Meets NEMA 4 or IP65 (front panel) Power Supply Output rating: 25 W Input voltage: 18 ~ 30 V DC Output voltage: +5 V @ 4 A, +12 V @ 0.5 A Touchscreen (optional) Type: 4-wire resistive Resolution: 1024 x 1024 Light transmission: 75% Interface: PS/2 Software driver: Supports DOS Touchscreen lifetime: More than 3 million touches
ORDERING INFORMATION
PPC-60S : 386-based panel PC with 6.0" VGA color STN LCD PPC-60S-RT : PPC-60S with resistive touchscreen PPC-57S : 386-based panel PC with 5.7" QVGA color STN LCD PPC-57S-RT : PPC-57S with resistive touchscreen PPC-57M : 386-based panel PC with 5.7" QVGA Mono LCD PPC-57M-RT : PPC-57M with resistive touchscreen PS-DC24-5D : 24 V DC / 2.3 A output adapter PPC-EXP-57 : Metal cover for 2 layers of 16-bit PC/104 expansion devices CD-ADP-57 : Removable adapter for CompactFlash memory
Advantech Home  |  Site Map  |  Service & Support  |  Buy Online Press Room  |  Current Events  |  Products  |  Application Stories  |  Contact Info             Copyright © 2001 Advantech Co., Ltd. Comments, questions, feedback?             All Rights Reserved Email us now