 |
| Product Lines
> Single Board Computers > POS-560-B1 |
| |
POS-560-B1
Pentium?/font> MMX Control Board for POS Applications |
| | |

Larger image (84 Kb)
|
|
 |
 |
Compatible with Intel Pentium?/font> and Pentium?/font> MMX; AMD K5, K6-266; and NS 6x86MX up to 233 MHz
Supports 3.3 V/5 V high resolution LCD as well as CRT VGA up to 2 MB display memory
Advanced CPU switching power module for stable and efficient CPU voltage power conversion
On-board 32-pin SSD socket supports 512 KB SRAM/Flash/EPROM. Can also support DiskOnChip?/font> 2000 Flash modules
|
|  |
 |
| |
|
|
|
- Compatible with Intel Pentium?/font> and Pentium?/font> MMX; AMD K5, K6-266; and NS 6x86MX up to 233 MHz
- Supports 3.3 V/5 V high resolution LCD as well as CRT VGA up to 2 MB display memory
- Advanced CPU switching power module for stable and efficient CPU voltage power conversion
- On-board 32-pin SSD socket supports 512 KB SRAM/Flash/EPROM. Can also support DiskOnChip?/font> 2000 Flash modules
|
|
|
Standard SBC Functions
- CPU: Intel Pentium?/font>, Pentium?/font> MMX; AMD K5, K6-266; and NS 6x86MX up to 233 MHz
- BIOS: Award 128 KB Flash BIOS includes Ethernet boot ROM, SSD driver and VGA BIOS. Supports Plug and Play
- Chipset: SiS 5571
- Green function: APM 1.1 compliant
- Second level cache: On-board 512 KB pipelined burst SRAM
- RAM: Two 72-pin SIMM sockets and one 168-pin DIMM socket for 128 MB total on-board memory
- IDE interface: One 44-pin header for 2.5" HDD and one 40-pin header supports 3.5" HDD
- FDD interface: Supports up to two FDDs
- Parallel port: Two parallel ports, supporting SPP/EPP/ECP parallel mode
- Serial ports: Four serial ports with +5 V/+12 V power capability
COM1, 2, 3: RS-232 COM4: RS-232/422/485 (jumper select)
- Watchdog timer: Software enabled/disabled. Timer interval of 1.5 seconds generates system reset in the event of program failure
- Keyboard connector: Keyboard: Mini-DIN keyboard connector and 5-pin header connector
- Mouse connector: PS/2 mouse connector
- Infared port: Supports up to 115 Kbps transmitting mode
- USB interface: Two USB connectors (complies with USB Spec. Rev. 1.0)
- I/O bus expansion: EISA bus connector provides ISA/PCI signals
- CMOS backup: CMOS data backup in Flash memory, avoiding system configuration data loss
SVGA/Flat Panel Interface
- Chipset: C & T 65550
- Display memory: 1 MB on-board memory, supports up to 2 MB
- Display type: Simultaneously supports CRT and flat panel (EL,LCD and gas plasma) displays. Supports 3.3 V LCD
- Display resolution: Supports non-interlaced CRT and LCD displays up to 1024 x 768 @ 256 colors with 1 MB on-board memory (optional 2 MB max.)
Digital I/O
- Two digital outputs: MOS FET output to direct drive relay or solenoid up to 2 A
- Four digital inputs: TTL compatible
Ethernet Interface
- Chipset: UM9008 Ethernet controller
- Ethernet interface: 10 Mbps Ethernet controller via RJ-45 connector. Novell NE2000 compatible. Includes software drivers and boot ROM
Solid State Disk
- Solid state disk:
- One 32-pin socket supports DiskOnChip?/font> 2000 Flash disk (8 to 288 MB) or 12 KB SRAM/Flash/ROM - DOS and Windows 3.1 command compatible
Mechanical and Environmental
- Power requirements:
+5 V @ 7 A (4.75 ~ 5.25) ?2 V @ 0.15 A
- Operating temperature: 0 ~ 60?C (32 ~ 140?F)
- Dimensions: 220 mm x 235 mm (8.7" x 9.25")
- Weight: 0.5 kg (1.1 lbs)
|
|
|
-
POS-560-00B1
: Pentium?/font> MMX Control Board for POS Applications (1 MB VGA memory)
-
POS-560-20B1
: Same as POS-560-00B1, but with 2 MB VGA memory
-
POS-102
: 2-slot PCI/ISA Riser Card for POS-808 (fits POS-560, POS-562)
-
POS-808-0000
: Book-size Chassis for POS Control Board
-
PCD-2000-080A/1600/2400/3200/4800/8000/0144/0288
: 8~ 288MB DiskOnChip?/font> 2000 Flash disk
-
POS-10486-1000
: Wiring Kit for POS Series (COM3, COM4, LPT2)
-
1759202400
: Fan with heatsink for processor
|
|
|