 |
| Product Lines
> Single Board Computers > PCM-4862 |
| |
PCM-4862
486 SBC with VGA/LCD, Ethernet and SSD |
| | |
Larger image (73 Kb)
|
|
 |
 |
 Up to DX4-100, DX5-133 CPU
Up to 512 KB 2nd level cache
16-bit Ethernet interface on-board, Novell NE2000 compatible
Local-bus VGA display controller (LCD, EL and CRT displays), flat panel type configured by programming the Flash chip
|
| |
 |
| |
|
|
|
The PCM-4862 is an enhanced, all-in-one single board 486 computer with an on-board Ethernet interface, local-bus VGA controller and solid state disk. The PCM-4862 offers all the functions of an AT-compatible industrial computer on a single board, but it fits in the space of a 5.25" floppy drive (only 5.75" x 8"). For maximum performance, the PCM-4862 also supports 2nd level cache sized from 128 KB to 512 KB (32 KB x 8, 64 KB x 8, or 128 KB x 8).
An on-board solid state disk (SSD) emulates a floppy drive using EPROM or Flash memory devices. You access the SSD using standard DOS commands or BIOS I/O. The system can even boot from the SSD. Disk capacity it up to 1.44 MB, depending on the size of the memory chips, or up to 144 MB if using a DOC?/font> 2000 Flash disk module. If you use Flash memory, you can read and write to the disk just like a floppy. If you use EPROM, the disk is read-only and you must program the chips with an EPROM programmer.
The PCM-4862 also complies with the "Green Function" standards and supports three types of power saving features: Doze mode, Standby mode and Suspend mode.
All display and Ethernet configuration is done through software. A single Flash chip holds the system BIOS, VGA BIOS and the network boot ROM.
If you need any additional functions, you can add up to six industry-standard functions, we have developed a PC/104 to ISA adapter so you can use you standard ISA cards.
|
|
|
|
- Up to DX4-100, DX5-133 CPU
- Up to 512 KB 2nd level cache
- 16-bit Ethernet interface on-board, Novell NE2000 compatible
- Local-bus VGA display controller (LCD, EL and CRT displays), flat panel type configured by programming the Flash chip
- Sockets for 1.44 MB solid state disk using Flash memory or EPROM
- Up to 144 MB of Flash memory using DOC?/font> 2000 Flash modules
- Up to 64 MB of DRAM
- Built-in Enhanced IDE (AT bus) hard disk drive interface
- Built-in floppy disk drive controller
- On-board keyboard or PS/2 mouse connector
- Two serial ports: one RS-232, one RS-232/422/485 selectable (uses 16C550 UARTs with 16 byte FIFO)
- One multi-port parallel port (ECP/EPP/SPP)
- Watchdog timer, time interval 1.6 seconds
- ISA-bus expansion with PC/104 modules
- Dimensions: 146 mm x 203 mm (5.75" x 8")
- Power management
- Single +5 V power supply
|
|
|
Standard SBC Functions
- CPU: Up to DX4-100, DX5-133
- BIOS: Award 128 KB Flash BIOS
- Chipset: VIA VT82C496G
- 2nd level cache: On-board 128 KB, up to 512 KB
- RAM: Two 72-pin SIMM sockets accept 8 to 64 MB EDO/FPM DRAM
- IDE interface: Supports up to 2 IDE devices
- FDD interface: Supports up to two FDDs
- Parallel port: One parallel port supports SPP/EPP/ECP parallel mode
- Serial ports: One RS-232, one RS-232/422/485
- Battery: 3.6 V @ 600 mAh lithium battery for extended data retention
- Watchdog timer: 1.6 second interval
- Keyboard/mouse connector: Supports PC/AT keyboard and a PS/2 mouse
- Power management: APM 1.1
- PC/104 expansion: 104-pin 16-bit PC/104 module
VGA/Flat-Panel Interface
- Chipset: C&T 65545
- Display memory: 512 KB DRAM (standard), 1 MB DRAM (optional)
- Display type: Supports CRT and flat panel (EL, LCD and gas plasma flat panel) displays. Can display CRT and flat panel simultaneously
- Display resolution:
- Non-interlaced CRT monitor resolution up to 1024 x 768 @ 16 colors
- Panel resolution: Supports 640 x 480 @ 256 colors (512 KB DRAM)
Ethernet controller function
- Chipset: Realtek RTL8019AS
- Type: 16-bit Novell NE2000 compatible
- Connectors: 10Base-T/AUI connector
Solid State Disk
- Sockets: Three 32-pin sockets for Flash/EPROM or DOC?/font> 2000 series
- Flash type: ATMEL 29C010/29C040/29C040A (+5 V); AMD/Intel 28F010 (+12 V)
- Size: Up to 1.44 MB or 144 MB (DOC?/font> 2000)
Mechanical and Environmental
- Power supply voltage: +5 V (4.75 V ~ 5.25 V)
- Power requirements: 3 A @ +5 V
- Operating temperature: 0 ~ 60?C (32 ~ 140?F)
- Dimensions: 203 mm x 146 mm (8" x 5.75")
- Weight: 0.3 kg (0.66 lbs)
|
|
|
|
|
|
