 |
| Product Lines
> Industrial Communications > PCL-841 |
| |
PCL-841
Dual-port Isolated CAN-bus Interface Card |
| | |
Larger image (25 Kb)
|
|
 |
 |
 Operates two separate CAN networks at the
same time
High speed transmission up to 1 Mbps
16 MHz CAN controller frequency
Takes 4 KB of address space, 40 base address adjustable in steps from C800H to EF00H
|
| |
 |
| |
|
|
|
The PCL-841 is a special purpose communication card which offers the connectivity of the Controller Area Network to your PC. With its built-in CAN controllers, the PCL-841 provides bus arbitration and error detection with an automatic transmission repeat function. This drastically reduces the chance of data loss and ensures system reliability. The on-board CAN controllers are located at different positions in the memory. You can run both CAN controllers independently, at the same time. The PCL-841 operates at baud rates up to 1 Mbps and can be installed in the expansion slot of your PC.
Direct Memory Mapping Enables Direct Access to the CAN Controller
The PCL-841 is assigned a memory address. This is the simplest method of integrating a board in a PC and provides the quickest access since the board is treated by the PC as being standard RAM.
|
|
|
|
- Operates two separate CAN networks at the
same time
- High speed transmission up to 1 Mbps
- 16 MHz CAN controller frequency
- Takes 4 KB of address space, 40 base address adjustable in steps from C800H to EF00H
- Optical isolation protection of 1000 VDC ensures system reliability
- Wide IRQ selection for each port: IRQ3, 4, 5, 6, 7, 9, 10, 11, 12, 15
- LEDs indicate transmit/receive status on each port
- Direct memory mapping enables very fast access to the CAN controllers
- C library and examples included
- DOS Library, Utility and Win 3.1/NT DeviceNet/CANopen DLL drivers
included
|
|
| |
-
PCL-841
: Dual-port isolated CAN serial interface card
|
|
|
|
